Advertisement
3. Complete the parameters, and click OK.
Item
Description
Preset
Set the length of time the camera stays at the preset after performing
the patrol.
See
Duration(s)
Set the time the camera stays at the preset after the patrol is
performed. The valid range is from 120 to 1800 seconds. The default is
10s.
Speed
Set the rotation speed. 1 means the slowest, 9 means the fastest. The
default is 5.
4. Repeat the above steps to add more routes.
Note: Up to 4 patrol routes are allowed for each PTZ camera. Up to 8 presets ( keypoints) are allowed
for each patrol route.
• Call a Preset
Select a preset patrol in the list, click
• Other Operations
• Edit: Click
to edit the preset patrol parameters.
• Delete: Click
to delete a key point; Click
• Move Up/Move Down: Click
presets.
•
Recorded Patrol
Record a patrol route so the PTZ camera can patrol according to the recorded patrol.
• Add a Recorded Patrol
1. In the Recorded Patrol tab, select a patrol route.
2. Click
to start recording. Steer the camera to the desired direction, adjust the zoom,
focus, iris as needed during the process.
3. Click
to stop recording.
4. Click Apply.
Preset
for setting preset.
to start the preset patrol. To stop, click
/
48
UNIGUARD 4 & 8 HDD Series
to delete all keypoints.
to adjust the sequence of these
Advertisement
