UNIGUARD 4 & 8 HDD Series
4.7.4 Video Loss
A video loss alarm is reported when the NVR loses video signals from a camera.
1. Go to Menu > Alarm > Video Loss
2. Video loss alarm is enabled by default. To disable video loss alarm for a channel, click
,
which then changes to
.
3. Set the alarm-triggered actions and arming schedule. Click the corresponding to go to the
Trigger Actions page and Arming Schedule page respectively. See 4.7.5.2 Alarm-triggered Actions
and 4.7.5.3 Arming Schedule for details.
4. (Optional) To apply the same settings to other cameras, click Copy and select the desired
parameter(s) and camera(s), and then click OK.
149