Advertisement
4.4.6.2 ONVIF Auth
When ONVIF authentication is enabled, a username and password will be required to access
the NVR via ONVIF.
This feature is enabled by default. Go to Menu > System > Security > ONVIF Auth
4.4.6.3 802.1x
802.1X can prevent unauthenticated devices from accessing the local area network.
Note:
•
Only some NVRs support this function.
• You need to configure and enable this function on the network switch first.
• For multi-NIC devices, this feature will be disabled automatically if you change the NIC's working mode.
1. Go to Menu > System > Security > 802.1x.
2. Choose the NIC. Skip this step if the device has only one NIC.
3. Select Enable 802.1x.
4. Configure the parameters.
Parameter
Protocol
EAPOL Version
Username/Password
5. Click Apply.
Description
Default: EAP-MD5.
Choose 1 or 2. It must be the same version configured on the
network switch.
Must be the username and password configured on the network
switch.
123
UNIGUARD 4 & 8 HDD Series
Advertisement
