Playback
Preview Mode
VCA Search
Output Mode
Manual
4.1 Camera
In this section, you are allowed to configure the settings including IP Cameras, Fisheye, Snapshot,
OSD,PTZ setup and more.
4.1.1 Camera
Note:
•
Before you start, make sure the IP Cameras are connected to your NVR via network.
• An IP Cameras should be connected to one NVR only. An IP Cameras managed by multiple NVRs may
cause unwanted
4.1.1.1
Camera
You can add IP Cameras manually or automatically using this page.
Go to Menu > Camera > Camera > Camera.
Play the video of the current day for the camera linked to the current
window. You can also choose to play videos from other days as needed.
Switch between Normal and Smart. The default is Normal mode.
Search the VCA snapshots and recordings in the Behavior Search page.
Choose a video output mode, including standard, soft, bright, vivid, and
custom.
Brightness, saturation, and other parameters are also configurable.
Manual settings include manual recording, manual snapshot, and manual
alarm, buzzer, let through manually.
UNIGUARD 4 & 8 HDD Series
22