Advertisement
4.3 Network
You can configure the network parameters of the NVR, such as IP address.
Note: The default IP address of network interface 1 is 192.168.1.30, and that of
network interface 2 is 192.168.2.30.
4.3.1 Basic
4.3.1.1 TCP/ IP
Configure IP address and other network parameters of the NVR.
1. Go to Menu > Network > Basic > TCP/IP.
2. Choose a working mode. Only multi-NIC NVRs support these three working modes.
Working Mode
Multi-address
Load Balance
Net Fault-tolerance
3. Configure the network parameters according to the actual network environment.
Description
Two NICs work independently. You need to configure the NICs
separately.
Two NICs use the same IP address and work together to share the
sending and receiving bandwidth.
Two NICs use the same IP address, and if the primary NIC fails, the
standby NIC takes over seamlessly to ensure uninterrupted
network connection.
92
UNIGUARD 4 & 8 HDD Series
Advertisement
