Advertisement
4.3.1.4 Email
Configure email so the NVR can send alarm information to specified users through email when
an alarm occurs.
Note: Select the Send Email checkbox on the Trigger Actions page before you start configuration.
1. Go to Menu > Network > Basic > Email.
2. Configure the parameters.
Parameter
Description
Enable Server
SMTP server authentication, when enabled, can enhance email
security. This feature is disabled by default. To enable it, you need
Authentication
to enter the correct username and password.
Username/
Username and password of the SMTP server. Usually it is the
username and password of the email box.
Password
SMTP Server
SMTP server address.
SMTP Port
Default: 25. Range: [1-65535].
Enable TLS/SSL
When enabled, communication security will be improved by
encrypting emails via TLS or SSL. This feature requires the SMTP
server to support TLS/SSL.
failed, try 587 or 465.
Sender
Sender's name.
Sender's Address
Sender's email address, which can the same as the recipient's
address.
Note: After TLS/SSL is enabled, if email sending via port 25
97
UNIGUARD 4 & 8 HDD Series
Advertisement
