Advertisement
• Call a Recorded Patrol
Click
to start the recorded patrol. Click
•
Auto Guard
Configure auto guard so the PTZ camera automatically performs the specified action (e.g.,
going to a preset or starting a patrol) after being idle (no user operation) for a certain length of
time.
Note: Before use, you need to add a preset or a patrol route.
1. In the Auto Guard tab, select the Enable check box to enable auto guard.
2. Set the parameters.
Item
Idle State(s)
Mode
Preset/Patrol
3. Click Apply.
Description
Set the idle duration for the camera to start auto guard. 1 to 3600
seconds are available. The default is 60s.
Select preset or patrol route.
Select a preset number or patrol route number.
49
UNIGUARD 4 & 8 HDD Series
to stop the recorded patrol.
Advertisement
