Advertisement
2. Connection and Installation
Prepare a 1# or 2# Philips screwdriver, a pair of antistatic gloves or a wrist strap.
Disconnect power before installation
2.1 Remove Upper Cover
1. Loosen the screws on the upper cover.
2. Slide the upper cover backward, then lift it up to remove the cover.
2.2 Install Disk
The installation steps for devices with mounting plate and disk bracket are different. Choose the
installation method according to your device model.
Device with mounting plate
1. Loosen the screws of the mounting plate on the side panels.
UNIGUARD 4 & 8 HDD Series
3
Chapter
2
Advertisement
