Advertisement
4.4 System
4.4.1 Basic
You can configure Configure the basic information of the system.
1. Go to Menu > System > Basic.
2. Configure the basic parameters.
Parameter
Device Name
Device ID
Device Language
Auto Logout(min)
Instant Playback (min)
Mouse Pointer Speed
Enable Password
Protection
Description
The default name is the NVR model. You can change it as needed.
Used to distinguish devices if you have more than one device. You can
change it as needed.
Choose the system language. The system will restart after you change
the system language.
Note: Not all devices can switch the language.
If you are not on the live view page and don' t perform any operation,
you will log out automatically when the set time is over, and the live
view page will be displayed.
Default: 5 minutes. You can change it as needed.
Set the instant playback time. Default: 5 minutes.
Drag the slider to adjust the speed (left to right: slow to fast).
When the auto logout time is over, the user needs to enter the login
password in order to access the main menu.
This feature is enabled by default.
Note: Only admin can change the setting.
111
UNIGUARD 4 & 8 HDD Series
Advertisement
