Alarm Light
The illuminator of the selected camera flashes for a certain period of time when an alarm occurs.
This action is only available to cameras that support alarm light.
Configure this action as follows:
1. Select the Alarm Light check box, select the alarm mode, and configure other parameters as
needed.
Mode
Description
Day/Night
Select the day and time (day/night) in which alarm light is enabled.
Mode
Custom Mode
Select the day and time (start/end time) in which alarm light is
enabled.
Blink Time(s)
Set the duration that the illuminator flashes when an alarm occurs.
2. (Optional) To apply the same settings to other days, select the desired day(s) after Copy To.
3. Click OK.
Snapshot
The NVR takes a snapshot from a specified camera when an alarm occurs.
Note:
This action is only available to certain alarm functions such as motion detection and human
body detection, and is not available to VCA functions.
Note:
The camera automatically switches to day or night mode according to the
ambient brightness. See Network Camera User Manual for details.
Note: Up to 4 time periods are allowed per day, and the time periods cannot
overlap.
UNIGUARD 4 & 8 HDD Series
156