EverFocus UNIGUARD 4 HDD Series User Manual page 158

4.7.3 Human Body Detection
Human body detection detects humans in a specified area. An alarm is reported when the
detection rule is triggered.
1. Go to Menu > Alarm > Human Body Detection.
2. Select the desired camera, and click Enable.
3. Set the detection rule. Only 1 detection rule is allowed. Click
a rectangular detection area.
To redraw the detection area, select the set rule, and click
Note
:
click
4. Drag the slider to adjust detection sensitivity. The higher the sensitivity, the more likely
humans will be detected, and the more likely false alarms will occur. Set based on the scene and
your actual needs.
5. Set the alarm-triggered actions and arming schedule. Click the corresponding to go to the
Trigger Actions page and Arming Schedule page respectively. See 4.7.5.2 Alarm-triggered Actions
and 4.7.5.3 Arming Schedule for details.
6. (Optional) To apply the same settings to other cameras, click Copy and select the desired
parameter(s) and camera(s).
7. Click Apply
UNIGUARD 4 & 8 HDD Series
in the preview window to draw
. To delete the detection area,
148