EverFocus UNIGUARD 4 HDD Series User Manual page 33

• Add IP Cameras
The system automatically searches for IP Cameras and lists the discovered. Click Refresh, the
system refreshes the list and IP Cameras status. Choose a way to add IP Cameras.

Option 1: Custom Add
1. Click Custom Add.
2. In the window displayed, enter the IP Cameras ' IP address and complete other settings,
then click OK. You may check the camera's status.
• : Camera online.
• : Camera offline. Point to the icon to view the failure information.
• : The camera is added to another NVR.
3. Repeat the above steps to add other IP Cameras.

Option 2: Search Segment
1. Click Search Segment. Enter the start and end IP addresses, click Search. The discovered
IP devices are listed.
2. Select the desired camera, click

Option 3: Add All
Click Add All to add all the discovered IP Cameras (if not exceeding the upper limit).

Option 4: Click
UNIGUARD 4 & 8 HDD Series
to add it to the NVR.
23