Advertisement
•
Screen Configuration
By default, camera IDs correspond to live view windows: D1 to window 1, D2 to window 2,
and so on. You can change the correspondence relationship as follows. The example below
shows how to switch D1 and D2.
Note: You may also drag an image on the live view page to swap windows, and then view the changed
window-channel binding relationship on this page. But this method requires the Configure permission, and it
cannot switch windows that are not on the same screen.
1. Click window 1 on the right side. Window 1 is selected.
2. Click D2 on the left-side channel list. Now window 1 shows D2, and window 2 shows None.
Note: On the left-side channel list,
window.
3. Click window 2 on the right side. Window 2 is selected.
is empty for D1, which means the channel is not bound to any
114
UNIGUARD 4 & 8 HDD Series
Advertisement
