Advertisement
UNIGUARD 4 & 8 HDD Series
4.7 Alarm
Set alarm rules and alarm-triggered actions so as to alert users when an alarm occurs.
4.7.1
Motion
Motion detection detects motions in specified grids on the image. An alarm is reported when
detection rules are triggered.
icon appears in the upper right corner of the preview page when
the alarm occurs.
1. Go to Menu > Alarm > Motion Detection.
2. Select the desired camera, and click Enable.
3. Set the detection area. The default is the full screen. You can adjust grid detection areas as
needed.
• To erase grids, click or drag on grid areas.
• To redraw grids, click Clear All, and then click or drag on blank areas to draw grids.
• To detect the full screen, click Full Screen.
Note:
When a moving object is detected, the grids where the object appears on the left- side image are
filled by
.
4. Drag the slider to adjust detection sensitivity. The higher the sensitivity, the more likely small
motions will be detected, and the more likely false alarms will occur. Set based on the scene and
your actual needs.
5. Set the alarm-triggered actions and arming schedule. Click the corresponding to go to the
Trigger Actions page and Arming Schedule page respectively. See 4.7.5.2 Alarm-triggered Actions
and 4.7.5.3 Arming Schedule for details.
6. (Optional) To apply the same settings to other cameras, click Copy and select the desired
parameter(s) and camera(s).
7. Click Apply.
146
Advertisement
