Advertisement
Enable
Cause of
Monitoring
Monitoring List
Alarm Threshold
(3) Click OK.
5. (Optional) To apply the monitoring tasks to other cameras, click Copy, select the desired
monitoring task(s) and camera(s), and then click OK.
6. Click Apply.
View Library Sync Status
•
This function is only available to cameras with face recognition support and camera
side analysis enabled. Library sync indicates the sync of face libraries from NVR to IP
Cameras. After IP Cameras receives a face list, it can compare the captured faces with
the face images in the face list and upload the comparison results to NVR.
Click Library sync state to view the sync status of face lists and faces in the face lists
from NVR to IP Cameras. You may manually synchronize the face lists in Not Started
state.
•
View faces by status: Select a state from the Sync Status drop-down list to view faces in
this state.
•
Manually sync face lists: Select the face list to be synced and click Manual sync. If a
face in a face list is not synced successfully, you can manually sync the face list.
Other Operations
•
Operation
Description
Delete the selected monitoring task(s).
Delete
Enable/disable the monitoring task.
/
Edit the monitoring task.
View Real- time Snapshots
•
1 .
Right- click on the live view page and select Preview Mode > Smart, then the real-
time snapshots are shown on the right.
2. Click a snapshot to view detailed information.
Enable/disable the monitoring task.
Enter the cause of the monitoring task.
Select a face list from the Monitoring List drop-down list or click
Add Face List to create a face list to monitor.
Set the alarm threshold by dragging the slider. The NVR takes
snapshots when the similarity between a detected face and a
face image in the monitoring list reaches the threshold. Default:
80.The higher the alarm threshold, the more accurate the
matching result.
55
UNIGUARD 4 & 8 HDD Series
Advertisement
