Advertisement
Configure this action as follows:
1. Click
.
2. Select the camera to perform this action and select the preset you want the camera to go to
when an alarm occurs.
Note:
Before use, you need to configure presets on the PTZ camera. See Network Camera User
Manual for details.
3. Click OK.
Note: To delete or unlink a preset, click
Preview
The NVR plays the live video of the specified camera(s) when an alarm occurs. To perform this
action, you need to configure Max. Alarm-Triggered Live View Windows ( 1/4/9 available) under
Menu > System > Preview.
The live view page displayed in the event of alarms varies depending on the number of linked
cameras and the number of alarm-triggered live view windows. When an alarm occurs, the live
view page shows the live video from the linked camera(s) with a red frame; when the alarm ends,
the live view page returns to the original state.
• When Max. Alarm-Triggered Live View Windows is set to 1 Window, the live view page plays
live video in one window. If more than one camera is linked, the live video switches at 5s.
.
152
UNIGUARD 4 & 8 HDD Series
Advertisement
