Advertisement
4.3.3.5 FTP
Configure FTP so the NVR can upload images to the FTP server.
Note:
• This feature is only available to certain NVRs.
• To use this feature, you need to deploy an FTP server first.
• After the FTP server is enabled and connected, the NVR can automatically upload images
to the FTP
server.
1. Go to Menu > Network > Advanced > FTP.
2. Select Enable FTP.
3. Configure server parameters. Click Test to test the connection between the NVR and the
FTP server.
Parameter
IP Address
Port
Anonymous
Username
Password
Description
FTP server address.
The default is 21. You can set a different port as needed.
When enabled, the NVR will connect to the FTP server as
anonymous user without username/ password required.
Username used to access the FTP server.
Password used to access the FTP server.
UNIGUARD 4 & 8 HDD Series
109
Advertisement
