EverFocus UNIGUARD 4 HDD Series User Manual page 117

• Manual
If the router does not support UPnP, you have to configure internal and external ports
manually.
Note:
• Make sure the ports configured on the NVR are consistent with that configured on the router.
• For some routers, the NVR's external and internal ports must be the same, and they also must be the
1. Choose the Manual mapping mo same as the ports on the router.
2. Set the external ports manually.
3. Click Apply.
Note:
After port mapping is configured, you can open the Web interface using the following
address: Router' s WAN IP: external HTTP port. For example, the router' s external IP
address is 1 0 . 2 . 2 . 1 0 , and the external HTTP port is 82, then enter http://10.2.2.
10:82 in the Web browser's address bar.
de.
107
UNIGUARD 4 & 8 HDD Series