•
Change Camera Password
You can change password of camera(s) one by one or in batches.
1. Select a camera and click
2. Enter the new password and confirm the password.
Note: Select Use Admin Password, the camera' s password is changed to the admin password of
the NVR, and cannot be edited.
3. Click OK. Check if the password is successfully changed.
•
Restore Default Settings
Select the camera, click
camera's default settings will be restored.
4.1.2 Encoding
Configure storage mode, capture mode, stream type, etc.
Note:
•
The configuration items may vary with IP Cameras models or versions.
• Some functions may be unavailable if the IP Cameras version is too low. In this case, you need to
upgrade the IP Cameras first.
1. Go to Menu > Camera > Encoding.
, or select the target cameras and click Batch Change Password.
. A message indicating camera restart appears, click OK and then the
31
UNIGUARD 4 & 8 HDD Series