Advertisement
4.6.2
Snapshot
Make a snapshot schedule.
1. Go to Menu > Storage > Snapshot Schedule
2. Select the camera for which you want to make a snapshot schedule.
3. Select the Enable Schedule check box.
4. Set the snapshot schedule. See
Snapshot Type
Normal
Event
Motion
Alarm
M and A
M or A
None
5. Click Apply.
•
Other Settings
Item
Enable Redundant
Snapshot
Draw a Schedule
Description
Captures images during specified time periods.
Captures images in the event of an event-triggered alarm.
Captures images in the event of motion.
Captures images in the event of alarm input. Configure 4.7.5
Alarm Input first before making an alarm schedule.
Captures images when motion and alarm input occur
simultaneously.
Captures images when motion or alarm input occurs.
No snapshot schedule.
Description
Snapshot backup, stores snapshots to redundant disks
synchronously to prevent snapshot loss in case of read/write disk
failure. You need to configure at least one redundant disk before
enabling redundant snapshot. See
Note:
A redundant disk can be used for both recording backup and
snapshot
backup.
136
UNIGUARD 4 & 8 HDD Series
and
Edit a
Schedule.
Disk Management
for details.
Advertisement
