Advertisement
6. Shutdown
This chapter describes device shutdown, logout, and restart.
Shutdown refers to turn off the operating system of the device with power supply connected.
Please disconnect the power supply if the device will be shut down for a long time.
• To shut down the NVR, long press the power button on the front panel (if available) for more
than 3 seconds till an on-screen message appears, and then click Yes.
• To shut down, log out, or restart the NVR, hover the mouse at the bottom of the preview page
to display the screen toolbar, click
Note: Unsaved settings will be lost if the NVR is shut down unexpectedly, for example, due
to a power failure. A shutdown during a system upgrade may cause startup failures.
and then select shut down, log out, or restart as needed.
186
UNIGUARD 4 & 8 HDD Series
Advertisement
