Advertisement
6. Set the alarm-triggered actions and arming schedule. See 4.7.5.1 Alarm-triggered Actions
and Arming Schedule for details.
7. Click
right to Advanced, configure the parameters as needed, and then click OK.
On certain NVRs, the Advanced page shows as follows:
Parameter
Min. Pupillary
Distance(px)
Number of Snapshots
Enable Face Selection
Description
The minimum distance (measured in pixels) between two
pupils. Faces with pupillary distance smaller than the value
will not be captured.
Note:
The default value varies by image resolution, and the valid range
varies by NVR model.
The number of snapshots to be captured when the detection
rule is triggered. Range: 1 to 30. Default: 5.
Select whether to select face snapshots to report.
52
UNIGUARD 4 & 8 HDD Series
Advertisement
