3.2 Startup Wizard
The Startup Wizard will guide you through some basic settings for the NVR. Please follow the on-
screen instructions to proceed.
Note: If you don't want to run the startup Wizard to make any settings when you restart the NVR
next time, you can go to Menu > System > Basic and then uncheck the Start wizard function.
1.
Click the Start Wizard button to start with the startup wizard.
2.
Enable or disable the wizard as needed and then click Next or click 2.
3.
Set the time parameters, including time zone, date format, time format, and system time,
and then click Next.
UNIGUARD 4 & 8 HDD Series
13