Advertisement
Note:
For a multi- NIC NVR, you can choose an NIC as the default route. When the NVR
connects to an external network, data will be forwarded via the default route.
For an NVR with PoE ports, you can configure an IPv4 address for the internal NIC.
The MTU must be in the range of [576- 1500]. To use IPv6, you must set MTU within
[ 1280- 1500], and make sure the IPv6 addresses of the NVR and PC are
connected. To use functions such as live view, playback, make sure IPv4
addresses of the NVR and PC are also connected.
4. Click Apply
4.3.1.2 P2P
With P2P you can manage and operate the NVR remotely on a mobile phone.
1. Go to Menu > Network > Basic > P2P. P2P is enabled by default.
2. Choose a way to add the NVR to cloud :
App: You can scan the QR code with Guard Viewer App installed on your mobile device to
add and remote access the NVR.
Website: Go to star4live.com and follow instructions to add the NVR.
3. (Optional) Select Snapshot Upload, and the NVR will upload images to cloud.
4. Click Apply.
5. Check the deviec status. If online, the current username will be displayed. If offline, the
common cause will be displayed, and troubleshoot accordingly.
6. (Optional) To delete the NVR from cloud, click Delete.
UNIGUARD 4 & 8 HDD Series
93
Advertisement
