Advertisement
4.1.3 Snapshot
Configure snapshot parameters.
1. Go to Menu > Camera > Snapshot > Snapshot Type
Select the camera and set the parameters as needed.
Item
Snapshot Type
Resolution
Image Quality
Snapshot Interval
3. (Optional) To apply the same settings to other cameras, click Copy and select the desired
camera(s).
4. Click Apply
Description
Supports scheduled snapshot and event-triggered snapshot. You
need set image quality and snapshot interval for them
respectively.
• Schedule: A snapshot is taken according to the set schedule.
• Event : A snapshot is triggered by an event such as alarm
input and motion detection alarm. Manual snapshots are event-
triggered snapshots.
The number of pixels in a frame. Only certain NVRs support
setting resolution.
Set the snapshot quality. High, medium, or low are available.
Select the time interval between two snapshots from the drop-
down list.
34
UNIGUARD 4 & 8 HDD Series
Advertisement
