Advertisement
4.4.3.2 DST
1. Go to Menu > System > Time > DST.
2. Select DST.
3. Configure the parameters.
4. Click Apply.
4.4.3.3 Time Sync
When Sync Camera Time is enabled, the NVR syncs time to the connected cameras regularly.
This feature is enabled by default.
Note:
•
Time sync occurs when a camera goes online for the first time.
•
If Sync Camera Time is enabled, time sync occurs every 30
minutes.
1. Go to Menu > System > Time.
2. Enable/disable this feature as needed.
3. Click Apply.
UNIGUARD 4 & 8 HDD Series
117
Advertisement
