EverFocus UNIGUARD 4 HDD Series User Manual page 89

3. Complete the monitoring task settings.
Parameter
Task Name
Enable
Cause of Monitoring
Monitoring Channels
Monitoring List
Monitoring Schedule
Match Trigger Action
Not Match Trigger
Action
4. Click OK.
• Other Operations
Operation Description
Delete Delete the selected monitoring task(s).
Enable/disable the monitoring task.
/
Edit the monitoring task.
Description
Enter a name for the monitoring task.
Enable/disable the monitoring task.
Enter the cause of the monitoring task.
Select the channel(s) to monitor.
Select the plate list to monitor. Only 1 plate list is allowed.
Set the monitoring schedule as needed. See Recording Schedule for details.
Set the action( s) to be triggered when a captured plate number
matches a plate number in the monitoring list. See 4 . 7 . 5 . 2 Alarm-
triggered Actions for details.
Set the action( s) to be triggered when a captured plate number does
not match any plate number in the monitoring list. See Alarm- triggered
Actions for details.
79
UNIGUARD 4 & 8 HDD Series