Advertisement
4.
Configure TCP/IP. Select the working mode and NIC. Check Enable DHCP to automatically
obtain the IP address, subnet mask and IP default gateway. You can also enter the information
manually. Then, click Next
5.
Add IP devices. Select the IP devices to add in the discovered device list, and click Add.
Note:
•
To add IP devices through PoE ports, see Option 6: Connect via Cable in Add IP Cameras
for details.
•
The added IP devices can go online and start live view only if the password is still
the default password. If the password has been changed, you need to enter the
correct password for the camera to go online.
•
If the desired IP device is not in the device list, you may add it in a preview page or
under Camera > Camera > Camera.
6.
Click OK
UNIGUARD 4 & 8 HDD Series
14
Advertisement
