Advertisement
4.6.7 Advanced
Configure the storage policy when the storage is full.
1. Go to Menu > Storage > Advanced.
2. Select whether to overwrite the existing data or stop storage when the storage is full
When HDD Full
Overwrite
Stop
Description
The disk space is divided into allocated space and remaining space
according to whether the disk is used for storage by cameras.
• If a camera is not allocated storage space, it will use the
remaining disk space, and its oldest data will be overwritten when
the remaining space is used up.
Note: As the remaining disk space is variable and older recordings may
be overwritten due to insufficient storage space, please allocate storage
space with caution. For example, on a device with 20G disk capacity
and two cameras, if camera 1 is allocated 10G, camera 2 will use the
remaining 10G if it is not allocated storage space. In this case, you can
view the last 5 days of recordings from camera 2. However, if you add a
new camera to the device, there will be less storage space available to
camera 2, and fewer days of recordings can be viewed.
• If a camera is allocated storage space, its oldest data will be
overwritten when the allocated space is used up.
This option is only effective to cameras that have been allocated
storage space. When enabled, if the allocated space of a camera
is used up, new recordings/ snapshots will not be saved.
145
UNIGUARD 4 & 8 HDD Series
Advertisement
