Advertisement
Select the counting type: Total, People Entered, or People Exited. Total is
Counting Type
the default counting type.
• Total : Displays the number of people entering and leaving the detection area.
•
area. An entry is counted as a person crosses the tripwire in the
direction of the arrow
•
area. An exit is counted as an object crosses the tripwire in the
opposite direction of the arrow and passes through the detection area.
Report Interval(s)
Set the time interval for reporting people flow statistics. Default: 60. Range: 1
to 60. The NVR reports people flow statistics to the uplink platform at set
intervals. The uplink platform must subscribe to the function to receive the
statistics.
Select the Enable Clear by Schedule check box and set the time to clear
Enable Clear by
people counting statistics.
Schedule
5.
To be alerted when the number of people in the detection area exceeds a certain
number, you can enable and configure People Present Alarm under Menu > Alarm > People
Present Alarm.
6. Click Apply.
•
View Real-time Statistics
Right-click on the live view page and select Preview Mode > Smart, then the real-time people
statistics are shown on the right. See 4.2.1.12 People Flow Counting for details.
People Entered : Displays the number of people entering the detection
and passes through the detection area.
People Exited : Displays the number of people leaving the detection
Note:
•
Before use, you need to enable people counting OSD under Menu > Camera
> OSD.
•
People that loiter in the detection area, cross the tripwire only, or cross the
detection area only are not counted.
70
UNIGUARD 4 & 8 HDD Series
Advertisement
