Advertisement
Preset/ Preset
Patrol/Recorded
Patrol/ Auto Guard
/
/
•
Preset
A preset position (preset for short) is a saved view used to quickly steer the PTZ camera to a
specific position.
• Add a Preset
1. Use the PTZ direction buttons to steer the PTZ camera to the desired position.
2. Select a preset number not in use, and click
• Zoom in or out on images.
Note: You can also zoom in or out using the scroll
wheel on your mouse.
• Focus far or near for clear images.
• Increase or reduce the amount of light that enters the
lens of the camera.
Control the rotation speed of the camera. 1-9 are
available. 1 means the slowest, and 9 means the fastest.
Click to display the PTZ Configuration page.
• Turn on/off the light.
• Turn on/off the wiper.
• Turn on 3D positioning.
• Turn on/off the heater.
• Turn on/off the snow removal.
• Turn on/off PTZ shortcut operations.
Note:
•
Make sure that the 3 D positioning, heater and snow
removal functions are supported by the camera before
using.
•
Use 3 D positioning to zoom in or out. Dragging from top
down zooms in. Dragging the other way zooms out.
• For detailed information, see Preset,
Recorded Patrol
and
Auto Guard
• Go to a preset : Click
preset position.
• Delete a preset : Click
and
Note:
Start or stop preset patrol.
to edit the preset name.
46
UNIGUARD 4 & 8 HDD Series
Preset
respectively.
, the PTZ camera goes to the
to delete the preset.
are displayed for saved presets only.
Patrol,
Advertisement
