Enable Startup Wizard
Intelligent Mark
3. Click Apply
4.4.2 Preview
Configure the screen display and preferred stream type for preview
4.4.2.1 Preview
Configure the basic preview parameters and display mode.
1.
Go to Menu > System > Preview.
•
Basic Preview Configuration
Startup wizard appears when the NVR starts up for the first time. If the
checkbox is selected, the startup wizard appears every time the device starts
up. You may click Wizard to set wizard on the Menu page.
When enabled, smart detection rules will be displayed on the live
video, or smart detection objects will be marked, and the
corresponding smart data will be displayed. Smart rules are yellow
detection boxes or detection lines.
Detection boxes have two colors with different meaning as described
below:
• Green: Data have changed but didn't trigger the rules.
• Red : Data in the area have triggered the rules configured for the VCA
alarm and a VCA alarm has occurred.
Note: Some smart functions do not support this feature.
112
UNIGUARD 4 & 8 HDD Series