Advertisement
4.2 VCA
You can configure VCA (Video Content Analysis), analyzer, and VCA search on this page.
4.2.1 VCA Config
VCA includes face recognition, perimeter protection, temperature detection, mixed-traffic
detection, exception detection & statistics, and people counting. You can monitor people
flow, roads and moving objects by configuring VCA. The VCA functions and parameters
may vary with NVR model.
Note: VCA functions are not available if there is no disk in slot 1
.
1. Go to Menu > VCA > VCA Config.
2. Select a camera.
3. Select the check box of the VCA function to be enabled, and choose whether to
implement this function on the camera side or the NVR side.
• Camera Side Analysis: The VCA function is implemented by the camera.
• NVR Side Analysis: The VCA function is implemented by the NVR.
Note:
The parameters of some VCA functions supported on the camera side are more than
that supported on the NVR side.
Before you enable camera side analysis, make sure the camera is connected via private protocol.
VCA functions that are not supported by the camera or NVR are grayed out.
VCA functions on the NVR side is subject to device capabilities. For more information, go
to Menu > VCA > VCA Config > Analyzer
4. Click
to configure the function.
UNIGUARD 4 & 8 HDD Series
50
Advertisement
