Advertisement
Note:
To change the IP Cameras connected to the channel, you can edit the IP channel related
parameters ( except IP address) , or directly click another camera in the list above.
The configuration items may vary with IP Cameras model.
Cameras corresponding to PoE ports or switching ports cannot be deleted.
Delete IP Cameras
•
You can delete IP Cameras(s) one by one or in batches.
Note: Cameras corresponding to PoE ports or switching ports cannot be deleted.
•
Select a camera to be deleted, click
Select cameras to be deleted, click Delete, and click OK in the pop-up window
•
Batch Change Password
When multiple IP Cameras are not added successfully due to incorrect password, and if the
login passwords of these cameras are the same, use this function to change the passwords in
batches.
Note:
•
This function only changes the password used to add cameras. It does not change the cameras' login
password.
•
This function is only applicable for IP Cameras with the same login password. If one of the cameras still
fails to
be added after you change the password, it means the camera' s login password is different, and you need
to change the password separately.
1.Select the cameras with the same password. Click
2. Enter the new password and confirm the password.
3. Click OK.
•
Network Configuration
Select the camera, click
default gateway for the camera. Click Apply.
, and click OK in the pop-up window.
under Configure. Edit the IP address, IPv4 subnet mask, IPv4
26
UNIGUARD 4 & 8 HDD Series
, and select Batch Edit Password.
Advertisement
