EverFocus UNIGUARD 4 HDD Series User Manual page 57

3. Click OK to save. Repeat the above steps to add all the presets.

Go to a Preset
In the preset list, select the preset to call and click
position.

Delete a Preset
In the preset list, select the preset to delete, and then click
• Preset Patrol
Set a preset patrol route so the PTZ camera can patrol by presets (go from one preset to the
next in the specified order).

Add Preset Route
1. Click Preset Patrol, and select a patrol route.
2. Click . The figure as shown below appears.
UNIGUARD 4 & 8 HDD Series
. Then the camera rotates to the preset
.
47