Mounting Method - Fuji Electric FE ZSS Instruction Manual

4. MOUNTING METHOD

ANGER
This analyzer is not explosion-proof. Do not use it in an atmosphere of ex-
plosive gas. Otherwise, it can result in serious accidents such as explosion,
fire, etc.
AUTION
The analyzer should be installed in a place conforming with the installa-
tion requirements noted in this instruction manual. Otherwise, it may
cause toppling, dropping, electric shocks, fire or malfunction of the unit.
Request assistance from the professionals or the vendors when mount-
ing, moving, re-mounting and carrying out piping and wiring works as-
sociated with these activities. A poor installation may cause accidental
tip over, electric shock, injury, etc.
During installation, make sure that the inside of the unit is free from ca-
ble chips and other foreign objects. Otherwise, it may cause fire accident
or malfunction.
For lifting the analyzer, be sure to wear protective gloves. Bare hands
may leave you prone to an injury. If the temperature in the installation
location is high, be sure to wear leather gloves. Otherwise, you may suf-
fer a burn.
The analyzer is heavy. It should be transported carefully by two or more
persons if manually required. Otherwise, bodily harm may ensue.
Do not look into the transmitter unit or direct the laser beam to the eyes
of people while the power is turned ON. Otherwise, the laser beam may
damage cornea of the eye.
The laser beam is the invisible infrared light. Do not watch the laser
beam directly or scattering light.
Do not watch the laser beam directly with the optical measuring device.
Otherwise, it may cause serious damage to your eyes.
- 10 -
INZ-TN1ZSS-E