Table of Contents
Advertisement
Clear
vision
You should inspect the headlights regularly (for example when refu-
eling) and clean off any solid dirt or insects from the lenses.
To ensure the system works properly in w inter, keep the washer jets
free of snow and remove any ice using a de-icing spray. •
Service
position
It is only possible to change wiper blades if you move the
wiper arms to the service position
In order to use the windshield wipers, the front lid must be
completely closed
Moving
wiper
blades
to the service
position
- When there is a risk of frost, make sure that the wiper
blades are not frozen to the windshield.
- Switch the ignition on .
- Move the wiper lever to position O
~
page 54,
fig. SO.
- Press the [
Reset]
button until the Display type menu
appears in the Driver Information
System display .
- Using the rocker switch and the [
Reset)
button, se lect the
Set > Wipers > Front > Service position on funct ion . The
w indsh ield wiper arms move to the service position.
Moving
wiper
blades
to park
position
- Make certain that the wiper arms ar e lying against the
windshield .
- Switch the ignition on and move the wiper lever from posi-
tion O to 4
~
page 54,
fig. SO. The wiper arms will move
back to the park position.
0
Note
Never dr ive your veh icle whe n the windshield wiper arms are in the
service position and pull ed away from the windshie ld. When you drive
faster tha n 4 mph (6 km/h), the w iper arms automatically return to
the park posit ion and could cause paint damage to the front lid!
[ i ]
Tips
•
You can also turn on the service position, for examp le, if you want
to protect the windsh ield from icing by using a cover.
•
The service position moves to
off
automatically when you operate
the winds hield wiper lever, or speed exceeds 4 mph (6 km/h). •
Replacing
front
wiper
blades
Wiper blades in good condition help keep the windshield
clear.
Fig . 5 1 Unlatch ing
wipe r blades
Advertisement
Table of Contents
