Table of Contents
Advertisement
Clear vision
Clear vision
Lights
Switching
the
headlights
on and off
·"ti-·
!
-
t i.
ID
<O
-
O >
:!
ti.
ID
<O
Fig. 41 Instrument
panel: light switch
Fig. 42 Instrument
panel: light swit ch
with daytime running
lights (DRL )
The light switch must not be overturned past the stops in
either
direction.
Switching
on automatic
headlight
control*
- Turn the light switch to AUTO*=:> fig. 41.
Switching
on the side marker
lights
- Turn the light switch to
~oo~ .
Switching
on the
headlights
and high
beam
- Turn the light switch to
io.
Push the high beam lever forward towards the instrument
panel=:>
page 52 .
Switching
off the lights
- Turn t he light switch to
0 .
The headlights only work when the ignition is switched on . While
starting the engine or when switching off the ignition, the headlights
will go off and only the side marker lights will be on.
Daytime
running
lights
(DRL)
(USA
models)
The daytime running lights can be turned on or off using this func -
tion. If the function is active, the daytime running lights are turned
on automat ically when the ignition is switched on .
The daytime running lights are activated only when the light switch is
at the AUTO* or DRL
*
position .
Daytime
running
lights
(Canada
models
only)
The daytime running lights are act ivated only when the light switch
~
fig. 41 is either at the
O
or the
~oa;
position.
The daytime running lights function cannot be turned off.
Automatic
headlight
control*
In the switch position AUTO the automatic headlight control is
turned on. The low beams are turned on automatically through a light
sensor as soon as ambient brightness (e.g. when driving into a
tunnel) falls below a value preset at the factory. When ambient
.,_
Advertisement
Table of Contents
