1/10 of a mile (100 meters) . You can set the trip odometer back to
zero by pressing the reset button => fig. 4 .
With the ignition off, pushing of the Set/Check button => page 8,
fig. 2
®
can turn on the display field lighting for a few seconds.
Malfunction
message
If there is a malfunction somewhere in the instrument
cluster,
dEF
w ill appear in the trip odometer and will stay on . Contact your autho·
rized Audi dealer to have the problem corrected .
Immobilizer
When the ignition is switched on, the data on the ignition key are
scanned automatically .
If an unauthorized
key was used,
SAFE
is displayed continuously in
the odometer disp lay field . The vehicle cannot be operated
:::> page
38.
[ i ]
Tips
•
The digital clock and the odometer are turned on for about
30
seconds when the driver's door is opened.
•
When the ignition is tu rned off, the odometer reading and the
dig ita l clock with date display can be sw itched on for about
30
seconds by pressing the Set/Check button => page
8,
fig .
2
®· •
Cont rols and equip·
ment
Vehicle OP-eration
Instruments
and warning
/ indicator
lights
Warning/indicator
lights
Overview
The warning/indicator lights indicate different functions
or a possible malfunction.
Fig. 5 Instrument cluster w ith warning/indicator lights
Audi magnetic ride
Tire pressure too low
Electronic power control
=> page
12
=> page 13
=> page 13
Electronic Stabilization Program (ESP) ::::, page 13
USA models:
=> page 13
Malfunction Indicator lamp (Mil)
Vehicle care
Do-it-yourselt service
-
iTechnical data