Table of Contents
Advertisement
&
WARNING (continued)
to withstand only those loads imposed by correctly fitted child
restraint s.
• Never mount two child restraint systems on one LATCH lower
anchor point.
• Never attach two child restraint systems to one tether strap or
tether anchorage.
• Never attach a tether strap to a tie-down hook in the luggage
compartme nt.
• Never use child restraint tether anchorages to secure safety
belts or other kinds of occupant restraints.
•
Never secure or attach any luggage or other items to the LATCH
lower anchorages or to the tether anchors.
• If a tether or other strap is used to attach a child restraint to
the front passenger seat, make sure that it is not so tight, that it
causes the weight-sensing mat to measure more weight than is
actually on the seat.
• The heavier weight registered can make the Advanced Airbag
System work as though an adult were on the seat and deploy the
Advanced Airbag when it must be suppressed causi ng serious or
even fatal injury to the child.
• If you must install a rearward facing child safety seat on the
front passenger seat because of exceptional circumstances and
the PASSENGER AIR BAG
OFF
light does not come on and stay on,
immediately install the rear-facing child safety seat in a rear
seating position and have the airbag system inspected by your
Audi dealer. •
Safety first
Vehicle OP-eration
Child
Safety
Installing
the upper
tether
strap
on the
anchorage
Installing
the tether
strap
Fig.127
Tetherstrap:
proper routing and
mounting
Fig.128
Tetherstrap:
proper routing and
mounting
-
Release or deploy the tether strap on the child restraint
according to the child restraint manufacturer's
instruc-
tions .
- Guide the upper tether strap into the rear cargo area
=>
fig .
128.
- Slide the tether strap hook over the anchor bracket.
-
Pull on the tether strap hook so that the spring catch of
the hook engages.
.,
Vehicle care
Do-it-yourselt service
iTechnical data
Advertisement
Table of Contents
