Audi TT 2010 Owner's Manual page 155

Hide thumbs Also See for TT 2010:
Table of Contents

Advertisement

&
WARNING (continued)
- Always move the front passenger seat into the rearmost
position of the passenger seat's fore and aft adjustment range,
and as far away from the airbag as possible before installing
the child restraint.
- Always make sure that nothing prevents the front
passenger's seat from being moved to the rearmost position in
its fore and aft adjustment range.
- Always make sure that the backrest is in the upright posi-
tion.
• Always buckle the child safety seat firmly in place even if a
child is not sitting in it. A loose child safety seat can fly around
during a sudden stop or in a collision.
• Always read and heed all WARNINGS whenever using a child
restrained in a vehicle is being used
=> page 117,
"Safety belts",
~
page
126, "Airbag system" and ~
page
148, "Child Safety".
&
WARNING
To reduce the risk of serious injury, make sure that the
PASSENGER AIR BAG
OFF
light comes on and stays on whenever a
child restraint is installed on the front passenger seat and the
ignit ion is switched on.
• Take the child restrain t off the front passenger seat and install
it properly at one of the rear seat positions if the PASSENGER AIR
BAG
OFF
light does not stay on.
• Have the airbag system inspected by your authorized Audi
dealer immediately.
&
WARNING
A child in a child restraint installed with the LATCH lower anchor-
ages or with the standard safety belt on the rear seat may play
Safety first
Vehicle OP-eration
Child
Safety
&
WARNING (continued)
with unused rear seat safety belts and become entangled
resulting in serious personal injury and even death.
• Always buckle unused rear seat safety belts out of reach of chil-
dren in child seats and properly activate the convertible locking
retractor so that the child cannot unreel the safety belt from the
retractor . •
Child
safety
seats
Infant
seats
Babies and infants up to about one year old and 20 lbs. or
9
kg need special rearward-facing child restraints that
support the back, neck and head in a crash.
Fig. 116 Schematic
overview: rearward-
facing infant seat,
properly installed on
the rear seat
- When using the vehicle safety belt to install a child safety
seat, you must first activate the convertible locking
retractor on the safety belt to prevent the child safety seat
from moving =>
page
159 or install the seat using the
LATCH attachments.
Vehicle care
Do-it-yourselt service
Technical data

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tts coupe 2010

Table of Contents