Table of Contents
Advertisement
S e lections
and settings
- Press the rocker switch @ to reach a menu display. The
switch is operated the same as the display (up/down).
Entering
and confirming
- Press the [Rese t ] button @ .
R e tu r ning to th e Sta rt menu
Press the [Reset] button longer than 2 seconds to return
from any menu level to the Start menu .
Using the rocker switch, you can select the menus in the d isplay or
change settings . A cursor appears on the left in front of the selected
values.
By pressing the [ Reset] button, you activate the selection you made
or confirm the values you set.
Selecte d
functions are identified with
a check mark or are carried out directly .
Mean ings of the symbols in the display :
Selection bar
>
./
D
-
Selected funct ion
Cursor
Check mark
Box
Triangle pointing up
Mean ing
Current Selection
Selected or Function
active
Not selected
Prev ious page
Triangle pointing down
Next page
_______
..
_________
,.
_________
_
Dri v er inform
a tion
syst e m
Selecting
settings
The Driver Information System settings are menu -
guided.
Select your settings as follows :
Fig. 16 Display: Menu
Sett ings, compute r
sele cted (page 1)
- Press the [Reset] button. The Start menu appears
~
page
23 , fig . 13.
- Press the rocker switch until Set is displayed.
- Press the [Reset] button. All the menus appear.
- Press the rocker switc h until the desired line is highlighted
(cursor)
~
fig . 16.
- Press the [Reset] button .
- If necessary, scroll by selecting and activating the symbol
for "Next page" or "Previous page".
When you have selected the Computer menu and activated it by
•
pressing the [ Reset] button , two computer levels appear (computer
1 and computer 2). Now you have to select the level you want using
the rocker switch and act ivate it with the
I
Reset] button. •
Cont rols and equip-
ment
Vehicle OP-eration
Vehicle care
Do-it-yourselt service
iTechnical data
Advertisement
Table of Contents
