Integrated Indicator And Integrated Indicator Control Panel; General Information - Belarus 922.6 Operator's Manual

2.8 Integrated indicator and integrated indicator control panel

2.8.1 General information

Integrated indicator 15 (Figure 2.1.1) (further in the text II) and integrated indicator
programming panel 19 (Figure 2.1.1) (further in the text IICP) display information on opera-
tional parameters of systems and units of the tractor and provide operator with data on vio-
lation of operation or breakdown of any system.
II includes gauges and signal lamps according to Figure 2.8.1:
1 – velocity gauge (needle indicator); 2 – engine speed gauge (needle indicator); 3 –
RPTO speed gauge (light indicator); 4, 9 – segments of RPTO speed scale (yellow color);
5, 7, 8 – segments of RPTO speed scale (green color); 6 – annunciator of RPTO speed
scale range «540 min
-1
«1000 min » (yellow color); 11 – pilot lamp to indicate low level of coolant (yellow color); 12
– pilot lamp to indicate upper beam of lights (blue color); 13 – pilot lamp to indicate trailer
turn flashers (green color); 14 – pilot lamp to indicate tractor turn flashers (green color); 15 –
pilot lamp to indicate parking brake (red color); 16 – pilot lamp to indicate increased voltage
in onboard circuit (red color); 17 – multifunctional display.
While switching on the instrument scale lighting, i.e. while shifting the central
dipswitch control into the position II "Instrument scale illumination, parking lights are on" and
the position III "Loads of the position II and front road headlights are on", light intensity of
multifunction display and PTO indicator segments is automatically reduced.
II (IICP) control panel is shown in Figure 2.8.2.
-1
» (yellow color); 10 – annunciator of RPTO speed scale range
Figure 2.8.1 – Integrated indicator
Figure 2.8.2 – Integrated indicator control panel
31
922.6-0000010 OM