Fuses For Electronic Systems Of Dl And Pto - Belarus 922.6 Operator's Manual

1 – supply fuse of the starter relay (located inside switching unit) and accumulator
battery remote control circuit with rated value of 80 А; 2 – heating plug supply fuse with rat-
ed value of 80А; 3, 4 –switching unit supply fuse with rated value of 60A; 5 – fuse block.
Figure 2.21.7 – The fuses located coarse fuel filter setting region
Open the hood to get access to the fuse block 2 located above the accumulator bat-
tery. The electrical equipment fuses located above the accumulator battery, are shown in
Figure 2.21.12.
Each of the covers of fuse blocks 5 (Figure 2.21.7) and 2 (Figure 2.21.12) has 2
spare fuses 2 (Figure 2.21.8). In order to get access to spare fuses 2 remove blind plug 3
from cover 1 of the fuse block.
Figure 2.21.8 – Arrangement of spare fuses in fuse block
2.21.3 Fuses for DL and PTO electronic control systems
To access the cutout fuses of the DL and PTO electronic control systems turn off
screw 3 (Figure 2.21.9) on cover 1 of side console 3 and remove the cover. The fuse block
of the DL and PTO ECSs is mounted on cover 1.
Fuses of DL and PTO electronic control systems are shown in Figure 2.21.10.
There are two possible ways of connecting the DL and PTO ECSs fuses to the
onboard network of the tractor:
1 – cover; 2 – spare fuse; 3 – blind plug.
1 –cover; 2 – screw; 3 – side console.
Figure 2.21.9 – Access to DL and PTO ECSs fuses
58
922.6-0000010 OM