Control Panel For Rear Axle Dl And Rpto - Belarus 922.6 Operator's Manual

DISABLING OF THE FIRST GEAR, SWITCHING TO FIRST GEAR FORM A HIGHER
GEAR IS CARRIED OUT WITH THE TRACTOR COMPLETELY STOPPED AND THE AND
CLUTCH PEDAL FULLY DEPRESSED!
Speed diagram table for standard configuration tires of BELARUS-922.6 tractor with
a reverse gear group is attached to the right cab window and is shown in Figure 2.14.4.
Figure 2.14.4 – Speed diagram for BELARUS-922.6 tractors with a reverse gear group
2.15 Control panel for rear axle DL and rear PTO
Elements of control panel of rear axle DL and rear PTO are shown in Figure 2.15.1.
1 –
instruction plate for rear axle DL control switch
–
rear PTO activation pilot lamp
instruction plate for rear PTO activation; 7 – rear axle DL control switch.
Figure 2.15.1 – Control panel for rear axle DL and rear PTO.
The DL is controlled by switch 7 (Figure 2.15.1), which has three positions:
"DL off" – a middle fixed position. It is used for hauling operations on roads with hard
surface.
"DL automatically engaged" is activated by pressing the top part of switch 7. It has a
fixed position. IT is used for carrying out operations, which include considerable rear-wheel
; 4 – rear PTO button switch; 5 – rear PTO control switch; 6 –
47
; 2 –
rear axle DL activation pilot lamp
922.6-0000010 OM
; 3