2.24 Control of the pneumatic system compressor
Handle for the pneumatic system compressor engagement 1 (Figure 2.24.1) has two
positions:
- left (the arrow on the handle is directed forward as viewed along tractor move-
ment) – "compressor off",
- right (the arrow on the handle is directed backward to tractor cab) – "compressor
on".
ATTENTION: TURN THE PNEUMATIC SYSTEM COMPRESSOR ON AND OFF
ONLY WITH THE ENGINE NOT RUNNING OR WITH MIN. IDLE SPEED OF THE EN-
GINE!
1 – handle for the pneumatic system compressor engagement; 2 – pneumatic system
compressor; 3 – diagram of the pneumatic system compressor control.
Figure 2.24.1 – Control of the pneumatic system compressor
Note – Figure 2.24.1 shows the position "pneumatic system compressor off".
OFF
ON
64
922.6-0000010 OM