Drawbar Hitch Crossbar (Dh -1) - Belarus 922.6 Operator's Manual

4.4.6 Drawbar hitch crossbar (DH -1)

Table 4.4.5 – Basic parameters and coupling dimensions of crossbar
1 Mounting location
2 Design features
3 Purpose
4 Distance between PTO shaft end extension
and connection pin axis, mm
5 Diameter of crossbar holes for connecting
pin, mm
6 Vertical load on DH in hitch point, kN, not
more than
7 Protective mean type
8 Connection point of a protective mean to the
tractor
9 Designation
10 EU certificate type
11 EU type approval, No
__________________________________________________________________________________________________________
1)
Implement accessory.
Figure 4.4.5 – Installation scheme of crossbar
DH type
On a suspension axis of rear lift link-
age
Draw crossbar on suspension axis of
rear lift linkage
For connection and coupling of
trailed, semi-trailed
mounted implements, equipped with
towing yokes
Safety chain (rope)
Lifting device bore
1220-4605025
108
922.6-0000010 OM
Crossbar
and semi-
595
32,5
3,5
1)
-
-