Integrated Indicator And Integrated Indicator Control Panel; General Information - Belarus 1523.5 Operator's Manual

2.8 Integrated indicator and integrated indicator control panel

2.8.1 General information

Integrated indicator 15 (figure 2.1.1) (further in the text II) and integrated indicator
control panel 16 (figure 2.1.1) (further in the text IICP) display information on operational
parameters of systems and units of the tractor and provide operator with data on violation
of operation or breakdown of any system.
II includes gauges and signal lamps according to figure 2.8.1:
1 – velocity gauge (needle indicator); 2 – engine speed gauge (needle indicator); 3
– RPTO speed gauge (light indicator); 4, 9 – segments of RPTO speed scale (yellow col-
or); 5, 7, 8 – segments of RPTO speed scale (green color); 6 – annunciator of RPTO
speed scale range «540 min
-1
range «1000 min » (yellow color); 11 – pilot lamp to indicate headlights upper beam
switching (blue color); 12 – pilot lamp to indicate switching of trailer turn blinkers (green
color); 13 – pilot lamp to indicate switching of tractor turn blinkers (green color); 14 – pilot
lamp to indicate parking brake engagement (red color); 15 – pilot lamp to indicate in-
creased voltage in on-board system (red color); 16 – pilot lamp to indicate low level of
coolant (yellow color).
Note – On tractors «BELARUS-1523.5» the pilot lamp to indicate low level of coolant 16 is
not used.
While switching on the instrument scale lighting, i.e. while shifting the central dipswitch
control into the position II "Instrument scale lighting, parking lights are on" and the position
III "Consumers of the position II and front road headlights are on", light intensity of multi-
function display and PTO indicator segments is automatically reduced.
The integrated indicator control panel is shown in figure 2.8.2.
-1
» (yellow color); 10 – annunciator of RPTO speed scale
Figure 2.8.1 – Integrated indicator
Figure 2.8.2 – Integrated indicator control panel
31
1523.5-0000010 OM