Wheels And Tires - MacDon 9250 Operator's Manual

Traction Drive: Wheels and Tires
POWER WHEELS
Check lubricant level every 200 hours or annually.
See "Fuels, Fluids
recommended lubricant.
NOTE:
The following Tractor Models have a 9 Bolt Rim
Mount Power Wheel:
MacDon 9250 / 9350
Westward 9250 / 9350
Prairie Star 4940 / 4950
Premier 2940 / 2950
Harvest Pro 8140 / 8150
The following Tractor Models have an 8 Bolt Rim
Mount Power Wheel:
MacDon 9352
Westward 9352
Prairie Star 4952
Premier 2952
Harvest Pro 8152
9 Bolt Rim Mount Power Wheel:
To check level, position wheel so fill/drain plug (B)
is 1 inch (25 mm) above the wheel's horizontal
center line (C). Lubricant should be level with fill
plug (B).
8 Bolt Rim Mount Power Wheel:
To check level, position wheel so fill/drain plug (D)
is at the top and level plug (E) is on the wheel's
horizontal center line. Lubricant should be level
with plug (E).
Change power wheel lubricant after the first 50
hours operation and every 1000 hours (or 3 years)
thereafter. To drain lubricant, position wheel so
drain plug is at 6 o'clock position. Remove level
and drain plugs.
Power Wheel Capacity
9 Bolt Rim Mount – 45 U.S. oz. (1350 mL)
8 Bolt Rim Mount – 60 U.S. oz. (1800 mL)
IMPORTANT: Failure to disengage final drives
before towing will result in serious transmission
damage.
CAUTION: With final drives disengaged, the windrower may roll on a sloped surface. Before
disengaging final drives, attach windrower to towing vehicle. After towing, engage drives
and park brake before detaching from towing vehicle.
To disengage final drives, remove cover (A) (both wheels) and reverse. Install with dished button facing in.
After towing, reverse covers again to re-engage final drives. See "Towing the Windrower".
Form # 46584
MAINTENANCE/SERVICE
and Lubricants" for
C
A
POWER WHEEL – 9 BOLT RIM MOUNT
A
POWER WHEEL – 8 BOLT RIM MOUNT
105
B
1" (25 mm)
D
Issue 11/06 Web Rev_01
E