Installing Genset Control Cables - Huawei iSitePower-M MAP05A1 User Manual

iSitePower-M (MAP05A1, MAB05B1)
User Manual
Figure 10-36 Installing an AC input power cable
----End

10.4.6 Installing Genset Control Cables

For a genset that starts when the dry contact is open, connect the signal cable to
ports NC and COM. For a genset that starts when the dry contact is closed,
connect the signal cable to ports NO and COM.
Procedure
Step 1 Install genset control signal cables.
Issue 06 (2023-04-24)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 Electrical Connections
128